Difference between revisions of "Pulse Integration"
Jump to navigation
Jump to search
| Line 10: | Line 10: | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
On the Pulse Trunk the Action Calls in Exigo must be defined. <br> | On the Pulse Trunk the Action Calls in Exigo must be defined. <br> | ||
| − | In the example above the Action Call (Directory Start) from 98001 to Action Call (Directory Stop) 98002 are defined. | + | In the example above the Action Call (Directory Start) from 98001 to Action Call (Directory Stop) 98002 are defined. <br> |
| + | |||
| + | |||
Revision as of 13:34, 7 November 2018
This article explains how to integrate a Pulse system with Exigo.
Integration with Pulse is based on SIP Trunk.
Pulse Configuration
Information regarding setting up a Pulse System can be found here.
In the Pulse System create a Pulse Trunk to the Exigo.
Go to Server Management -> Server Configuration -> Directory Settings:
On the Pulse Trunk the Action Calls in Exigo must be defined.
In the example above the Action Call (Directory Start) from 98001 to Action Call (Directory Stop) 98002 are defined.
