Difference between revisions of "TKIE-1"

From exigoWiki
Jump to navigation Jump to search
(Created page with "thumb|alt=TKIE-1.|TKIE-1 '''Voip Intercom Module''' The TKIE-1 is the extended version of our Turbine Kit range. It offers the same high quality audio as th...")
 
(→‎Restore Factory Defaults)
 
(17 intermediate revisions by 2 users not shown)
Line 2: Line 2:
 
'''Voip Intercom Module'''
 
'''Voip Intercom Module'''
  
−
The TKIE-1 is the extended version of our Turbine Kit range. It offers the same high quality audio as the TKIS-x kit, but adds to the feature list with an extra RJ45 port for dual Ethernet connectivity, dual relays, and a header for easy connection of audio accessories. For high-power applications, the TKIE-1 may be complemented with the TA-10 Relay Module which offers 2 DPDT relays suited for high-voltage/high-current applications.
+
The TKIE-1 is the extended version of our Turbine Kit range. It offers the same high quality audio as the TKIS-x kit, but adds to the feature list with an extra RJ45 port for dual Ethernet connectivity, dual relays, and a header for easy connection of audio accessories. For high-power applications, the TKIE-1 may be complemented with the [[TA-10]] Relay Module which offers 2 DPDT relays suited for high-voltage/high-current applications.
  
 
* IP station kit with extended functionality
 
* IP station kit with extended functionality
Line 10: Line 10:
 
* Line-in/Line-out connectivity for connection to audio devices
 
* Line-in/Line-out connectivity for connection to audio devices
 
* Header for connecting audio accessories
 
* Header for connecting audio accessories
−
* Possibility for connecting high-power relay module (TA-10)
+
* Possibility for connecting high-power relay module ([[TA-10]])
 
* High quality Turbine™ class output with 10W amplifier
 
* High quality Turbine™ class output with 10W amplifier
 
* Full open duplex and digital noise reduction
 
* Full open duplex and digital noise reduction
−
 
−
== Additional documentation ==
 
−
For more documentation, please visit the Zenitel web page: https://www.zenitel.com/product/tkie-1
 
  
 
== Connections ==
 
== Connections ==
Line 34: Line 31:
 
|}
 
|}
  
−
  '''Note!''' Use cables crimped with ferrules for terminal block connectors
+
  {{Note}} Use cables crimped with ferrules for terminal block connectors
  
 
  *If connected to two PoE-capable switches, only one of the ports will negotiate PoE; hence this is not a good solution for  
 
  *If connected to two PoE-capable switches, only one of the ports will negotiate PoE; hence this is not a good solution for  
Line 44: Line 41:
 
* When the TKIE-1 is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned.
 
* When the TKIE-1 is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned.
  
−
[[File:TFIE Connections.PNG]]
+
[[Image:TFIE Connections.PNG]]
  
 
<br style="clear:both;" />
 
<br style="clear:both;" />
Line 51: Line 48:
 
:The station can be powered from this port if the line supports Power over Ethernet (PoE).
 
:The station can be powered from this port if the line supports Power over Ethernet (PoE).
  
−
[[File:TCIS Connections 4.PNG|thumb|left|500px]]
+
[[File:TCIS Connections 4.PNG|thumb|left|500px|RJ45 PoE port]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
Line 76: Line 73:
 
:Pin 6  NC relay 2
 
:Pin 6  NC relay 2
  
−
  '''Note!''' Relay 1 is configured as output 7, and Relay 2 is configured as output 8!
+
  {{Note}} Relay 1 is configured as output 7, and Relay 2 is configured as output 8!
  
 
'''P6'''  Loudspeaker & Electret microphone
 
'''P6'''  Loudspeaker & Electret microphone
Line 84: Line 81:
 
:Pin 4  Electret Microphone -
 
:Pin 4  Electret Microphone -
  
−
'''J2'''  [[TA-10 Connection Board with Relays - 1008140100|Turbine Relay Module - TA-10]]
+
'''J2'''  [[TA-10|Turbine Relay Module - TA-10]]
−
  '''Note!''' Relay 3 is configured as output 9, and Relay 4 is configured as output 10!
+
  {{Note}} Relay 3 is configured as output 9, and Relay 4 is configured as output 10!
  
 
'''J8''' Headset/Handset connector
 
'''J8''' Headset/Handset connector
Line 98: Line 95:
 
:Pin 9 Line In Negative
 
:Pin 9 Line In Negative
  
−
The TKIS-2 has an RJ-45 PoE/LAN port, and 6-pin & 10-pin external connectors.
+
== Restore Factory Defaults ==
 +
See article: [https://wiki.zenitel.com/wiki/TKIE_Restore_Factory_Defaults Restore Factory Default]
 +
 
 +
== Accessories ==
  
−
{| border="1"
+
{|{{SimpleTable}}
−
|Ethernet/Power|| 10/100 Mbps Ethernet RJ-45 port for LAN (uplink) connection. Supports PoE (802.3af). Draws power from either spare line or signal line.
 
−
|-
 
−
|Secondary Power || 24 VDC (16 – 48 V) secondary power is provided from an external adapter.
 
 
|-
 
|-
−
|Relays || There is one Double Throw relay contact with 60W switching power. COM, NO, NC contacts are provided.
+
!style="background:#FFFFFF;" width="200"|[[File:TA-10.jpg|100px|link=TA-10]]
 
|-
 
|-
−
|Input/Output || 6 I/Os are available. Each I/O can be configured as either input, output, or LED driver.
+
|style="text-align:center;"|[[TA-10]]
 
|-
 
|-
−
|Audio Line Out || A balanced 600 ohm audio line out with induction loop signal
 
 
|}
 
|}
  
−
'''Note!''' Use cables crimped with ferrules for terminal block connectors
+
== Additional Documentation ==
−
 
+
For more documentation, please visit the Zenitel web page: https://www.zenitel.com/product/tkie-1
−
* When the TKIS-2 is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned.
 
−
<br style="clear:both;" />
 
−
 
 
−
===PCB - Front===
 
−
[[File:TCIS Connections 3.PNG]]
 
−
<br style="clear:both;" />
 
−
 
 
−
[[File:TCIS Connections 4.PNG|thumb|700px]]
 
−
'''P1''' RJ45 PoE port for 10/100 Mbit Ethernet connection.
 
−
:The station can be powered from this port if the line supports Power over Ethernet (PoE).
 
−
 
 
−
<br style="clear:both;" />
 
−
 
 
−
[[File:TCIS Connections 5.PNG|thumb|700px]]
 
−
'''P2''' 6-pin plug-on terminal for external connections.
 
−
:Pin 1/2  24 VDC for external secondary power if PoE is not used. Pin 1 is positive.
 
−
:Pin 3  COM relay
 
−
:Pin 4  NO relay
 
−
:Pin 5  NC relay
 
−
 
 
−
The relay can switch and carry continously 60W power maximum.
 
−
So with maximum current 2A, it can take maximum 30V, or with maximum voltage 250VAC it can take maximum 240mA.
 
−
 
 
−
<br style="clear:both;" />
 
−
 
 
−
[[File:TCIS Connections 7.PNG|thumb|700px]]
 
−
'''P4'''  Loudspeaker & Electret microphone
 
−
:Pin 1  10W Speaker amplifier +
 
−
:Pin 2  10W Speaker amplifier -
 
−
:Pin 3  Electret Microphone +
 
−
:Pin 4  Electret Microphone -
 
−
 
 
−
<br style="clear:both;" />
 
−
 
 
−
=Input Connectors=
 
−
[[File:TCIS Connections 6.PNG|thumb|700px]]
 
−
'''P3'''  10-pin plug-on terminal for external connections.
 
−
:Pin 1  5.3V (max. 200mA current)
 
−
:Pin 2  GND
 
−
:Pin 3  Button Input or LED Driver
 
−
:Pin 4  Button Input or LED Driver
 
−
:Pin 5  Button Input or LED Driver
 
−
:Pin 6  Button Input or LED Driver
 
−
:Pin 7  Button Input or LED Driver
 
−
:Pin 8  Button Input or LED Driver
 
−
:Pin 9  600 ohm balanced line out +
 
−
:Pin 10  600 ohm balanced line out -
 
−
 
 
−
<br style="clear:both;" />
 
−
 
 
−
=Output Connectors + 1 relay=
 
−
[[File:TCIS Connections 12.PNG|700px|Connecting to the onboard relay. Extra LED controlled by output 1]]
 
−
 
 
−
The extra relay for any of the 6 I/O pins is connected as shown:
 
−
 
 
−
[[File:TCIS Connections 14.png|600px]]
 
−
 
 
−
Most general purpose P-Channel MOSFET's should work. Recommended example: BSS84
 
−
 
 
−
The 5,3V output can deliver 200mA current maximum
 
−
 
 
−
=PCB - Rear=
 
−
[[File:TCIS Connections 8.PNG]]
 
−
 
 
−
[[File:TCIS Connections 9.PNG|thumb|700px]]
 
−
'''J6'''  10-pin terminal for digital MEMS Microphone
 
−
:Pin 1 Left mic select (Vdd)
 
−
:Pin 2  Right mic select (GND)
 
−
:Pin 3  Data
 
−
:Pin 4  Data
 
−
:Pin 5  Vdd 3.3V
 
−
:Pin 6  Vdd 3.3V
 
−
:Pin 7  CLK
 
−
:Pin 8  CLK
 
−
:Pin 9  GND
 
−
:Pin 10  GND
 
−
 
 
−
<br style="clear:both;" />
 
−
 
 
  
 +
== Availability ==
 +
This device is supported from Exigo 1.3 and newer.
  
 
[[Category:Hardware]]
 
[[Category:Hardware]]
 +
[[Category:Kits]]

Latest revision as of 08:36, 30 April 2018

TKIE-1.
TKIE-1

Voip Intercom Module

The TKIE-1 is the extended version of our Turbine Kit range. It offers the same high quality audio as the TKIS-x kit, but adds to the feature list with an extra RJ45 port for dual Ethernet connectivity, dual relays, and a header for easy connection of audio accessories. For high-power applications, the TKIE-1 may be complemented with the TA-10 Relay Module which offers 2 DPDT relays suited for high-voltage/high-current applications.

  • IP station kit with extended functionality
  • Dual RJ45 for Ethernet connectivity (with switch)
  • Dual relays (DPDT)
  • 6 configurable I/Os (input, output or LED-driving)
  • Line-in/Line-out connectivity for connection to audio devices
  • Header for connecting audio accessories
  • Possibility for connecting high-power relay module (TA-10)
  • High quality Turbine™ class output with 10W amplifier
  • Full open duplex and digital noise reduction

Connections

There are two RJ-45 ports located on the TKIE-1 that are used for PoE/LAN Ethernet connection.

There are 6 I/O connection options for the TKIE-1. These connections are used as digital input (eg. form a closing contact), digital output (5V), or LED driving (20mA max) for connecting sensors, indicators or integration to other systems.

Ethernet/Power The TKIE-1 supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line.*
Secondary Power If PoE in not available, the TKIE-1 can be powered from a 24-48 VDC local power supply.**
Relays There are two Double Throw relay contacts with 60W switching power. COM, NO, NC contacts are provided.
Input/Output 6 I/Os are available. Each I/O can be configured as either input, output, or LED driver.
Audio Line Out A balanced 600 ohm audio line out with induction loop signal 
Note.PNG Use cables crimped with ferrules for terminal block connectors

*If connected to two PoE-capable switches, only one of the ports will negotiate PoE; hence this is not a good solution for 
power redundancy (switch failure might lead to a reboot). Instead a “dumb” PoE injector (spare-pair power) should be used 
for the two Ethernet ports or a local 24 VDC local power backup. 

**If used together with PoE the station can be powered by 24 VDC as a local power backup.
  • When the TKIE-1 is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned.

TFIE Connections.PNG


P1&P2 RJ45 PoE port for 10/100 Mbit Ethernet connection.

The station can be powered from this port if the line supports Power over Ethernet (PoE).
RJ45 PoE port


P3 Secondary Power; 24-48VDC

P4 10-pin plug-on terminal for external connections.

Pin 1 5.3V
Pin 2 GND
Pin 3 Button Input or LED Driver
Pin 4 Button Input or LED Driver
Pin 5 Button Input or LED Driver
Pin 6 Button Input or LED Driver
Pin 7 Button Input or LED Driver
Pin 8 Button Input or LED Driver
Pin 9 600 ohm balanced line out +
Pin 10 600 ohm balanced line out -1

P5 6-pin plug-on terminal for external connections.

Pin 1 COM relay 1
Pin 2 NO relay 1
Pin 3 NC relay 1
Pin 4 COM relay 2
Pin 5 NO relay 2
Pin 6 NC relay 2
Note.PNG Relay 1 is configured as output 7, and Relay 2 is configured as output 8!

P6 Loudspeaker & Electret microphone

Pin 1 10W Speaker amplifier +
Pin 2 10W Speaker amplifier -
Pin 3 Electret Microphone +
Pin 4 Electret Microphone -

J2 Turbine Relay Module - TA-10 

Note.PNG Relay 3 is configured as output 9, and Relay 4 is configured as output 10!

J8 Headset/Handset connector

Pin 1 Offhook
Pin 2 GND
Pin 3 PTT
Pin 4 Handset Mic Positive
Pin 5 Handset Mic Negative
Pin 6 Headphone Positive
Pin 7 Headphone Negative
Pin 8 Line In Positive
Pin 9 Line In Negative

Restore Factory Defaults

See article: Restore Factory Default

Accessories

TA-10.jpg
TA-10

Additional Documentation

For more documentation, please visit the Zenitel web page: https://www.zenitel.com/product/tkie-1

Availability

This device is supported from Exigo 1.3 and newer.

Retrieved from "https://exigo.zenitel.com/w/index.php?title=TKIE-1&oldid=13488"