LED Brightness

From exigoWiki
Revision as of 16:41, 16 March 2017 by Hleong (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This article explains how to adjust the LED brightness on both the central equipment (ESC1 & ENA) and indoor access panels.

Central Equipment

LED brightness can be adjusted both locally and in EMT.

Local Adjustment

On both the ESC1 and ENA the local LED settings can be found under Settings > Display:

LED brightness


From this menu it is possible to adjust the LED and display brightness up or down.
It is also possible to test the LEDs.

EMT Settings

It is also possible to set the LED brightness in EMT.
In the device tree go to ESC1/ENA > LED:

LED brightness in EMT


For information regarding EMT vs local settings, see this article.

Access Panels

On indoor access panels (ECPIR-P and ECPIR-3P) it is possible to set the LED brightness both locally and in EMT.
It is also possible to do a test of the LEDs on the panel.
This is done by using the input action Panel Lamp Test to a DAK (or control input) on the panel.

Local Adjustment

The intensity of the LED and the backlight in the keys can be adjusted by pressing the dimmer button:

LED brightness adjustment on indoor access panels


The light intensity is increased or decreased by pressing plus (+) or minus (-) on the dimmer button respectively.

EMT Settings

It is also possible to set the LED brightness in EMT.
In the device tree go to the ECPIR-P/ECPIR-3P > LED:

LED brightness in EMT


For information regarding EMT vs local settings see this article.