Difference between revisions of "CRM-V-GN"
Jump to navigation
Jump to search
Rlorentzen (talk | contribs) |
Rlorentzen (talk | contribs) (→Installation) |
||
Line 16: | Line 16: | ||
# Slide the S1 switch (bottom back of station) to EXT to activate the external microphone function. | # Slide the S1 switch (bottom back of station) to EXT to activate the external microphone function. | ||
+ | [[File:CRM-V-GN Installation.PNG|thumb|left|500px]] | ||
+ | <br style="clear:both;" /> | ||
[[Category:Hardware]] | [[Category:Hardware]] |
Revision as of 12:38, 3 June 2016
Gooseneck Microphone for IP Flush Master
- Noise-cancelling gooseneck microphone for IP Flush Master station
- Ideal for Public Address and control room applications
Additional documentation
For more documentation, please visit the Zenitel web page: https://www.zenitel.com/product/crm-v-gn
Installation
- Remove the cover plug from the opening for the microphone on the front panel.
- Thread the microphone cable through the opening, the lock washer and nut.
- Tighten the nut on the microphone’s threaded stud.
- Insert the microphone’s IDC socket into the upper two pins of the 3-pin header (J7) located at the lower left side of the station. The signal wire (white) should be on the top pin while the ground wire (green) should be on the bottom pin.
- Slide the S1 switch (bottom back of station) to EXT to activate the external microphone function.