Release Note Exigo 1.5
Jump to navigation
Jump to search
Contents
Exigo 1.5.3.1
Release status: Official, available Release date: 02.02.2022 Software collection file: EXIGO-1.5.3.1.zip
Software included in EXIGO-1.5.3.1.zip
Product | Version | Product description |
VSF-Turbine | VSFT-PA.6.3.3.1 | Firmware for the following devices: ESC1 (Secondary System Controller), ENA2100, ENA2200 AC2, ENA2400 AC2, ECPIR-3P, ECPIR-P, EAPIR-8, EAPFX-1, EAPFX-6, EAPII-1, EAPII-6, TKIS-2, TKIE-2, IP-LCM. |
AlphaSys Firmware | 13.0.3.13 | Firmware for the ESC1 (Primary System Controller/AMC-IP board) alpha-sys_13.0.3.13.apkg, bsp_32.2.3.6.apkg |
VS-EMT Exigo Management Tools | EMT-1.6.3.0 | Configuration tool, installed on a Windows PC |
VS-DEVICE-MIB | 201806190000Z | SNMP MIB for Exigo EXI-Devices, for upload in 3rd-party SNMP based monitoring tools |
Bugfixes and improvements
MTN-3673 Correct SLM channel in LET communication is now used
The status in both channels are now correctly reported.
MTN-3650 Noise now removed when releasing PTT with use of PAM1H on Exigo ECPIR-3P
Known Issues
MTN-3565 When booting up an AB system, the controller comes up with "buzzer active" with no faults
This happens on the A controller. Click the wheel to silence the "buzzer".
Exigo 1.5.3.0
Release status: Official, available Release date: 24.11.2021 Software collection file: EXIGO-1.5.3.0.zip
Software included in EXIGO-1.5.3.0.zip
Product | Version | Product description |
VSF-Turbine | VSFT-PA.6.3.3.0 | Firmware for the following devices: ESC1 (Secondary System Controller), ENA2100, ENA2200 AC2, ENA2400 AC2, ECPIR-3P, ECPIR-P, EAPIR-8, EAPFX-1, EAPFX-6, EAPII-1, EAPII-6, TKIS-2, TKIE-2, IP-LCM. |
AlphaSys Firmware | 13.0.3.13 | Firmware for the ESC1 (Primary System Controller/AMC-IP board) alpha-sys_13.0.3.13.apkg, bsp_32.2.3.6.apkg |
VS-EMT Exigo Management Tools | EMT-1.6.3.0 | Configuration tool, installed on a Windows PC |
VS-DEVICE-MIB | 201806190000Z | SNMP MIB for Exigo EXI-Devices, for upload in 3rd-party SNMP based monitoring tools |
New Features and Enhancements
EPB-303 ENA2x00 AC2 released
From Exigo 1.5.3.0 version the ENA2x00 AC2 are supported. To learn more about the new amplifiers please go to https://www.zenitel.com/product. Please note that ENA2x00 AC2 are not yet supported in SIP and ICX AlphaCom mode.
Bugfixes and improvements
MTN-3539 SNMP temperature is now displayed correctly
MTN-3467 Global system settings override device settings
Notification is added to system settings page to warn user that saving system settings overrides local settings.
When a tick tone was started from amplifier web, the button label was not refreshed when another activity stopped the tick tone. The web indicated that tick tone was still active. This is now fixed.
MTN-2172 Tick tone will now be played out on access panels which is part of a zone
Known Issues
MTN-3565 When booting up an AB system, the controller comes up with "buzzer active" with no faults
This happens on the A controller. Click the wheel to silence the "buzzer".